(603) 688-6096AtlasRemodelingNH@gmail.comFacebookGoogleYouTube
Atlas High Performance HomesNew Hampshire · LLC
Service area · Cheshire County

Remodeling and Repairs in Cheshire County, NH

Every town and city in Cheshire County, with Census housing figures and links to each local page.

Cheshire County has 23 municipalities, including the city of Keene, and about 35,900 homes. Atlas serves all of them. 27 percent of the county's homes were built before 1940 (state: 19 percent) and 16 percent in 2000 or later (state: 20 percent). The towns with the largest share of pre-1940 homes are Troy (37%), Keene (34%), Nelson (34%); the most new construction since 2000 is in Rindge (31%), Stoddard (29%), Marlow (27%).

Towns and cities in Cheshire County

Figures are from the Census Bureau's American Community Survey (2020 to 2024 estimates). Linked towns have their own page.

Town or cityHomesMedian year builtBuilt before 1940Owner-occupied
Alstead980197314%76%
Chesterfield1,800198119%84%
Dublin790196828%83%
Fitzwilliam1,280196731%94%
Gilsum310197230%94%
Harrisville650196533%94%
Hinsdale1,830197221%80%
Jaffrey2,440197333%82%
Keene10,540196134%55%
Marlborough1,060197632%68%
Marlow430198120%93%
Nelson380197534%90%
Richmond530198522%98%
Rindge2,180198410%85%
Roxbury120196920%95%
Stoddard1,050197811%93%
Sullivan290197916%94%
Surry400197718%92%
Swanzey3,330197820%72%
Troy840197137%77%
Walpole1,750196733%70%
Westmoreland940197527%89%
Winchester1,990197728%73%

Roxbury, Sullivan are served too, but do not have a local page: we did not have enough reliable local data to write a useful page, and we would rather say nothing than guess.

How Cheshire County homes are heated

9 percent of the county's homes are seasonal or occasional-use homes (state: 10 percent). Main heating fuel for the homes that are lived in:

Main heating fuelCheshire CountyNew Hampshire
Fuel oil or kerosene57%40%
Propane14%19%
Utility gas4%21%
Electricity10%11%
Wood11%6%

Climate zone 5

The energy code places all of Cheshire County in climate zone 5. In climate zone 5 the energy code calls for R-20 cavity insulation, or R-13 plus R-5 continuous insulation, in new or rebuilt wood-frame walls, R-49 in the ceiling and R-10 insulation at slab edges to 2 feet deep. New Hampshire uses the 2018 International Energy Conservation Code with state amendments (Table R402.1.2 gives these values).

Building codes in Cheshire County

The state building code applies in every Cheshire County town and city. Local enforcement varies: some have a building or code office and some do not have a local inspector, so we confirm permit requirements with each town before work starts.

Travel

Crew travel and fuel are part of every written Atlas estimate, wherever the house is in Cheshire County.