Remodeling and Repairs in Gilford, NH
Remodeling, repairs, roofing and siding for Gilford homes, with what the Census housing figures for Gilford mean for the work.
Homes in Gilford
Gilford is a town in Belknap County. According to the U.S. Census Bureau's American Community Survey (2020 to 2024 estimates), it has about 5,210 homes, and the median home was built in 1983. 8 percent were built before 1940, lower than the county (17 percent) and lower than the state (19 percent). 84 percent are single-family houses and 93 percent of households own their home. 38 percent of homes are seasonal or occasional-use homes.
| Share of homes | Gilford | Belknap County | New Hampshire |
|---|---|---|---|
| Built before 1940 | 8% | 17% | 19% |
| Built 1940 to 1979 | 37% | 35% | 32% |
| Built 1980 to 1999 | 30% | 26% | 29% |
| Built 2000 or later | 25% | 22% | 20% |
| Single-family houses | 84% | 78% | 69% |
| Two to four units | 4% | 7% | 11% |
| Five or more units | 4% | 8% | 15% |
| Mobile homes | 8% | 7% | 5% |
| Owner-occupied | 93% | 80% | 73% |
| Seasonal or occasional use | 38% | 29% | 10% |
County and state columns are weighted from the town estimates.
What the housing means for the work
- 1980s and 1990s houses. 30 percent were built between 1980 and 1999. They were built to older energy codes, so attic air sealing is worth pairing with new windows or a roof.
- Newer homes. 25 percent were built in 2000 or later. Here the work is mostly first remodels.
- Seasonal homes. 38 percent of Gilford homes are held for seasonal or occasional use. A roof leak or ice dam in an empty house can go unseen all winter, so check the roof and attic before the snow.
- Delivered fuel. 73 percent of Gilford households heat mainly with oil or propane, so heat kept in by an air-sealed attic is fuel you do not have to buy.
- Wood heat. 10 percent heat mainly with wood. Around chimneys we keep roofing, siding and insulation work to the required clearances.
How Gilford homes are heated
The most common main heating fuel in Gilford is fuel oil or kerosene (48 percent of households).
| Main heating fuel | Gilford | Belknap County | New Hampshire |
|---|---|---|---|
| Fuel oil or kerosene | 48% | 50% | 40% |
| Propane | 25% | 22% | 19% |
| Utility gas | 2% | 8% | 21% |
| Electricity | 11% | 9% | 11% |
| Wood | 10% | 8% | 6% |
Climate zone and permits
Gilford is in climate zone 6; the Belknap County page lists what the energy code calls for there.
The state building code applies in Gilford. We confirm with the Gilford town offices whether a job needs a permit, and any permit fee is listed separately on the estimate.
Services for Gilford homes
- Window replacement
- Attic air sealing and insulation
- Bathroom remodeling
- Flooring
- Decks
- Roofing
- Doors, plumbing and repairs
Pricing and travel
Crew travel and fuel to Gilford are part of every written estimate. Enter Gilford as your town in the Instant Ballpark and it will tell you whether the range already includes them.
Neighboring towns
- AltonBelknap County. Median home built 1974; 17% built before 1940.
- BelmontBelknap County. Median home built 1983; 6% built before 1940.
- GilmantonBelknap County. Median home built 1981; 13% built before 1940.
- LaconiaBelknap County. Median home built 1974; 25% built before 1940.
- MeredithBelknap County. Median home built 1975; 22% built before 1940.
See every town in Belknap County, or the statewide service areas page.
Common questions
Do you work in Gilford?
Yes. Atlas serves every town and city in New Hampshire, including Gilford. Call or text (603) 688-6096 or use the form on this page.